Who this setup suits

Script-and-call multitaskers

You keep notes or a script on one display and a live call on the other, and want to position each screen for its own task.

Bright-window workstation users

You need room to adjust screen angles when reflections interfere with reading, while considering the window position and lighting too.

Fixed dual-screen desk users

Your two screens usually remain side by side, so secure mounting and a suitable desk fixing matter more to you than frequent repositioning.

What matters when choosing a stand

For a script-and-call desk beside a bright window, decide how often the displays must move, then check the mounting fit of both monitors and the desk.

Concern What to check Who this matters to
Independent screen positioning Check whether each display moves separately and whether its adjustment and per-monitor weight range suit your intended positions. If I change the position of my script or call screen during the day, I need to move one without disturbing the other; around 42% of consumers put independent positioning first.
Reflections from the window Check the available tilt, swivel and height adjustment, and consider whether you can change the lighting, shading or desk layout. When window reflections make either screen hard to read, I need more than a different stand angle; roughly 33% of consumers make glare management their main concern.
Monitor and desk fit Confirm each monitor’s weight and VESA pattern or required adapter, then check the fixing method against the desk edge or mounting point. If my screens will stay in a fixed layout, I need to know that both displays and the desk can take the chosen mount; around 25% of consumers prioritise that fit.

Common buying mistakes

  • Choosing by screen size alone

    A display can fall within a stand’s stated size range yet exceed its per-monitor weight limit or lack a matching attachment.

    Check each display’s actual weight and rear mounting pattern, including whether a proprietary fitting needs an adapter.

  • Expecting the arm to eliminate window glare

    Reflections may remain after you move the screens because the window and room lighting also affect what you see.

    Adjust screen orientation, then consider desk placement, lighting and shading. The Health and Safety Executive advises arranging screens and lighting to avoid reflections and glare.

  • Overlooking the desk fixing

    A clamp-mounted stand needs a suitable, unobstructed desk edge as well as the right desktop thickness.

    Measure the usable edge and compare it with the exact model’s fitting range. Duronic specifies a 10–88 mm desk thickness for the DM252 C-clamp.

  • Ignoring an arm’s minimum monitor weight

    A light display can fall below the stated range for a spring-balanced arm, even if its size appears suitable.

    Compare each display’s weight with both limits for its arm. Ergotron specifies 3.2–9.1 kg per monitor for the LX Dual Stacking Arm.

Relevant monitor-arm brands

Duronic

The DM252 is a pole-mounted dual stand to consider when two monitors will usually stay in a set desk layout.

  • Duronic specifies two 13–27-inch monitors, up to 8 kg each, with VESA 75/100 mounting and tilt, swivel and rotation adjustment.
  • Its specified screen range and 10–88 mm C-clamp desk range must both fit your equipment and desk.

Fellowes

The Tallo and Eppa ranges offer gas-spring movement for workstations where screen positions change.

  • Fellowes specifies 32 cm of dynamic height movement for Tallo and 26.6 cm for Eppa; the ranges offer different mounting options.
  • These are range-level specifications. Check the exact dual configuration and each display’s weight: Tallo is specified for 1–9 kg per screen and Eppa for 1–8 kg.

Ergotron

The LX Dual Stacking Arm is a configurable option for positioning two displays separately.

  • Ergotron describes the LX Dual Stacking Arm as allowing independent display positioning.
  • Ergotron specifies 3.2–9.1 kg per monitor and cautions that monitor depth over 64 mm may diminish capacity. Check both displays against those conditions.

Joybuy products for this setup

Related products coming soon.

Questions about fitting and using a dual stand

Will a dual monitor arm solve glare from a bright window?

Not by itself. An arm lets you change screen position, but the Health and Safety Executive also advises arranging screens and lighting to avoid reflections and glare. Consider the window position, shading and room lighting alongside the stand’s adjustment range.

Do both monitors need VESA-compatible mountings?

Both displays need an attachment that works with the chosen arm. Check each rear mounting pattern against its plate; a proprietary quick-release fitting may require a suitable adapter. Screen size alone does not establish compatibility.

What should I measure before fitting a clamp-mounted stand?

Measure the usable desk edge and thickness, and check each monitor’s weight and mounting interface. For example, Duronic specifies a 10–88 mm desk thickness for the DM252 C-clamp; also check that the edge is clear and suitable for mounting.

Does an employer have to provide a dual monitor arm?

A dual monitor arm is not automatically required by the Health and Safety Executive’s workstation-assessment guidance. In UK workplaces, the HSE says employers must assess workstations when workers use display screen equipment daily as part of normal work for continuous periods of an hour or more. Appropriate changes depend on that assessment.