Who each setup suits

Hands-off batch cooks

If you want to load ingredients and avoid rolling individual sheets, consider a fully automatic extruder with a fettuccine disc. Philips UK lists that disc and a capacity of up to eight portions in one run for the HR2665/93.

Rolled-pasta cooks

If choosing sheet thickness matters to you, look at electric roller-and-cutter machines. Marcato lists a fettuccine accessory for Pasta Fresca, while Nisbets UK lists built-in fettuccine cutting for the Imperia Pasta Presto Model 700; both use a sheet-pasta workflow rather than a shaping disc.

Existing KitchenAid stand-mixer owners

If you already have a compatible mixer, a powered attachment can roll and cut fettuccine without a separate pasta-machine motor. KitchenAid says its 5KSM3MPA fits KitchenAid stand mixers; dough preparation remains a separate step.

What matters when choosing

Decide which stages you want the machine to handle, then check its fettuccine fitting and capacity using the maker’s own units.

Fully automatic extruder

Choose it when: You want mixing and shaping in one appliance. Philips UK says the HR2665/93 includes a fettuccine disc and makes up to eight portions in one run.

Trade-off: You use its shaping-disc system rather than setting the thickness of a rolled sheet.

Electric sheet-and-cutter machine

Choose it when: You want rolled sheets cut into fettuccine. Marcato says Pasta Fresca also mixes dough; the Nisbets UK listing establishes rolling and cutting for the Imperia Pasta Presto Model 700.

Trade-off: You handle dough between stages, and the Imperia listing does not establish an automatic mixing stage.

Powered stand-mixer attachment

Choose it when: You already own a compatible KitchenAid stand mixer and want powered rolling and fettuccine cutting with the 5KSM3MPA.

Trade-off: The attachment needs the mixer and does not remove the separate dough-preparation step.

ConcernWhat to checkWho this matters to
Batch output and automation Check which stages are automated and whether capacity is stated in portions or dough weight. Philips UK states up to eight portions per run for the HR2665/93. I want to make several servings without repeatedly preparing and feeding sheets, so the work involved in each run matters most. Around 36% of consumers put batch output and automation first.
Sheet thickness and fettuccine cutting Confirm that the exact machine includes a fettuccine cutter, then check its sheet-width and thickness settings. When I make ribbon pasta, I want to choose the sheet thickness before cutting it. For around 29% of consumers, rolled-sheet control is the primary concern.
Using an existing mixer Check attachment compatibility with your exact stand mixer and allow room to feed and collect pasta sheets. I already have a KitchenAid stand mixer and would rather power the rollers with it than add another machine. Making use of that mixer comes first for around 14% of consumers.
Cleaning and storage Check the exact model’s instructions for removable parts, permitted cleaning methods and accessory storage. After making several batches, I need a clean-up routine I can manage and somewhere to keep the fittings. Around 21% of consumers make cleaning and storage their main concern.

Mistakes to avoid

  • Assuming fettuccine is included with every machine

    An electric pasta function does not establish which shapes the supplied fittings make. Philips UK lists a fettuccine disc for the HR2665/93; Marcato, KitchenAid and the Nisbets UK listing identify fettuccine cutters for their respective models.

    Check the exact model and package contents for a fettuccine disc or cutter before ordering.

    If the fitting is not included, making fettuccine may require a separate compatible accessory.

  • Comparing portions directly with dough weight

    Philips UK states up to eight portions for the HR2665/93, while Marcato states 750 g of dough for Pasta Fresca. Those are different capacity measures and do not establish which machine produces more pasta for your recipe.

    Choose the workflow you want, then assess each maker’s capacity claim on its own terms against the amount you plan to prepare.

  • Treating a mixer attachment as a standalone machine

    KitchenAid’s 5KSM3MPA rolls and cuts pasta using a compatible KitchenAid stand mixer; the attachment has no independent motor.

    Confirm compatibility with your exact mixer before choosing this route.

    Without a compatible mixer, you would need another appliance to use the attachment.

  • Overlooking the electrical version and instructions

    GOV.UK’s electrical-equipment guidance covers Great Britain and notes separate provisions for Northern Ireland. Suitability therefore needs to be checked for where the machine will be used.

    Check the exact listing’s plug, voltage and supplied use and cleaning instructions before ordering.

Relevant brands to consider

Philips

Its HR2665/93 represents the fully automatic extruder route for fettuccine.

  • Philips UK says this model includes a fettuccine disc, makes up to eight portions in one run and has non-stick, dishwasher-safe parts.
  • Its disc-based workflow does not offer the rolled-sheet thickness control of a roller-and-cutter machine.

Marcato

Pasta Fresca combines electric dough mixing with a sheet-and-cutter workflow.

  • Marcato states that Pasta Fresca mixes 500 g of flour and 250 g of liquid at a time, yielding 750 g of dough, and includes a fettuccine accessory.
  • The dough figure is not directly comparable with a maker’s portion claim, and the sheet-and-cutter workflow still involves handling dough.

Imperia

The Pasta Presto Model 700 is a motorised roller-and-cutter option for dough prepared separately.

  • Nisbets UK lists 15 cm rollers, six thickness settings and built-in fettuccine and tagliatelle cutters for this model.
  • Plan a separate dough-preparation stage rather than treating its rolling and cutting functions as automatic mixing.

KitchenAid

The 5KSM3MPA is a powered pasta attachment for an existing KitchenAid stand mixer.

  • KitchenAid says it fits KitchenAid stand mixers and has an eight-thickness roller with fettuccine and spaghetti cutters.
  • It requires a compatible mixer, while dough preparation remains a separate step.

Joybuy products

Related products coming soon.

Frequently asked questions

Do I need an automatic extruder to batch-cook fettuccine?

No. A roller-and-cutter machine is another route if you want to control the thickness of pasta sheets, though you will handle dough between stages. If reducing hands-on work is more important, Philips UK says its fully automatic HR2665/93 includes a fettuccine disc and makes up to eight portions in one run.

Can a KitchenAid attachment replace a separate electric pasta maker?

It can provide powered rolling and fettuccine cutting if you have a compatible KitchenAid stand mixer, but it is not a standalone machine. KitchenAid says the 5KSM3MPA fits its stand mixers; you must still prepare the dough separately.

What should I check when cleaning up after several batches?

Follow the care instructions for the exact model and check which parts can be removed or put in a dishwasher. Philips UK describes non-stick, dishwasher-safe parts on the HR2665/93, while Marcato describes removable components that make Pasta Fresca easier to access for cleaning.

What should I check for a machine I will use in the UK?

Check that the exact model and listing are suitable for your location, including the plug, voltage and supplied safety instructions. GOV.UK’s electrical-equipment guidance addresses Great Britain and notes separate provisions for Northern Ireland; follow the manufacturer’s instructions for parts that contact food as well.