Who is choosing this hob?

Hosts managing several pans

You want shakshuka in a large pan while heating bread, sides or sauces. The space available for placing those pans matters alongside the number of zones.

60 cm kitchen upgraders

You are replacing a conventional-width built-in hob. Check the worktop opening and electrical connection before deciding whether a wider layout would suit your cooking.

Cooks using a favourite skillet

You want to keep using a particular frying pan or casserole for shakshuka. Its base must be magnetic, and its size and shape need to suit the zones on the hob you choose.

What matters when choosing?

Start with the shakshuka pan and the other pans you intend to use, then check installation fit before comparing cooking controls.

Concern What to check Who this matters to
Usable pan space Compare your pan bases and their placement with the zone layout. Check whether a standard zone, bridge zone or flexible zone accommodates the shakshuka pan. For a broad shakshuka pan alongside sides, I need room to position everything without crowding; around 45% of consumers put usable pan space first.
Installation fit Compare the measured worktop opening with the exact installation drawing, and confirm whether the hob is plug-in or hardwired. If my existing opening or electrical setup needs changing, I need to resolve that before choosing cooking features; roughly 33% of consumers prioritise installation fit.
Heat-control convenience Check the exact model for boost and control functions that suit your move from sautéing to a gentler simmer. While managing the sauce and other dishes, I want to adjust the heat without disrupting my cooking; around 22% of consumers place control convenience first.

Mistakes to avoid

  • Assuming every frying pan works on induction

    Induction needs a magnetic pan base. A favourite shakshuka pan that lacks one will not heat on the hob.

    Check the pan maker’s induction guidance or test the base with a magnet before choosing the hob.

    Keeping a non-magnetic pan for this dish would mean using different cookware.

  • Choosing by nominal hob width alone

    The worktop opening is a separate measurement. AEG specifies a 750 × 490 mm cutout for its 780 mm-wide TO84IB00FB bridge model.

    Measure the existing opening and cabinet space, then compare them with the installation drawing for the exact model.

    A different cutout can mean worktop or cabinet alterations.

  • Treating plug-in and hardwired hobs alike

    The connection requirements differ by model: Bosch identifies the PUG61RAA5B as Plug & Play, while AEG specifies its TO84IB00FB as hardwired only.

    Confirm the chosen hob’s connection requirements. If the installation needs changing, ask a registered electrician to assess the load, circuit and cable rating, as Electrical Safety First advises.

    Changing the electrical arrangement can involve an assessment and installation work.

  • Choosing bridge or flex zones without checking the pan

    Those layouts offer more placement options for suitable cookware, but a conventional round pan may already fit a standard zone.

    Compare the base and shape of the pan you use for shakshuka with the model’s zone layout and the other pans you expect to use at once.

Induction hob brands for reference

Bosch

Relevant when comparing conventional 60 cm four-zone layouts and Plug & Play models.

  • Bosch lists the PUG61RAA5B as a 60 cm four-zone Plug & Play hob with PowerBoost and QuickStart.
  • Check bridge or flexible-zone capability on the individual model rather than assuming it across the range.

AEG

Relevant when a larger or longer pan makes a bridge-zone layout worth considering.

  • AEG describes its bridge function as joining two zones into a larger cooking area.
  • Its TO84IB00FB is a 780 mm-wide, hardwired model requiring a 750 × 490 mm cutout; those requirements should not be assumed for other AEG hobs.

NEFF

Relevant when flexible pan placement is a priority within an approximately 60 cm built-in format.

  • NEFF specifies two flex-induction zones, cookware detection and TwistPad control for the T56TT60N0.
  • Its flexible zones do not replace the need to check the pan’s magnetic base, the cutout and the electrical requirements.

Siemens

Relevant when comparing hob sizes and model-specific boost or frying-sensor controls.

  • Siemens lists 60 cm, 80 cm and 90 cm induction-hob categories; check the chosen model for its particular controls.
  • Siemens warns that dragging rough-bottomed pans or using abrasive cleaners can scratch standard ceramic glass.

Joybuy induction hobs

Related products coming soon.

Common questions

Will my existing shakshuka pan work on an induction hob?

It will work if its base is magnetic and induction-compatible. Bosch states that induction requires magnetic cookware, so check the pan maker’s specification or test the base with a magnet before choosing a hob.

Is a 60 cm four-zone hob enough for dinner-party shakshuka?

It can be enough if the shakshuka pan fits a standard zone and the remaining zones accommodate your side pans. If the main pan is unusually wide or long, compare bridge or flexible-zone layouts with its actual base and shape.

Can an 80 cm bridge hob replace my old hob without alterations?

Only if the exact model fits the available space and electrical arrangement. AEG specifies a 750 × 490 mm cutout and a hardwired connection for its TO84IB00FB, so compare its installation instructions with your kitchen before ordering.

When should I ask an electrician about the installation?

Ask a registered electrician to assess the installation if the chosen hob requires wiring changes or you are unsure whether the existing circuit can accommodate it. Electrical Safety First advises checking the load, circuit type and cable rating.

How can I avoid scratching the hob’s glass?

Avoid dragging rough-bottomed pans across the surface and use non-abrasive cleaning methods. Siemens warns that rough cookware bases and abrasive cleaners can cause fine scratches on standard ceramic glass.