For everyday batches of potato soup, start with a hob that fits your magnetic soup pot and gives you convenient control when reducing the heat from a boil to a simmer. If installation is the deciding factor, check the exact model: Beko describes the HIIP64530UFT as suitable for a standard 13 A socket, while AEG specifies the bridge-zone TO64IB00FB as hardwired only. A wider pot may make a bridge or flex zone worth considering, but its base still needs to suit the cooking area.
If you usually make a modest batch, you may want direct heat adjustments for bringing stock to the boil and then settling into a gentle simmer. A boost setting is available on some models, but you still need an induction-compatible pot.
For family batches or meal preparation, measure the pot base before choosing a cooking zone. Bridge and flex zones offer different ways to accommodate cookware, but the exact hob layout and pot dimensions still matter.
Before ordering, compare the new hob’s connection requirements and built-in dimensions with your kitchen. A model intended for a standard 13 A socket is not interchangeable with one specified as hardwired.
Check your soup pot and the planned installation before deciding whether boost, bridge or flex features would change how you cook.
| Concern | What to check | Who this matters to |
|---|---|---|
| Boil-to-simmer control | Compare power controls and any boost setting; check how you return to a gentle simmer. | I want to bring stock to the boil, then lower the heat without fuss while the potatoes soften. Roughly 36% of consumers put boil-to-simmer control first. |
| Pot and zone fit | Test the pot base with a magnet and compare its flat base diameter with the intended zone. | My existing soup pot needs to work on induction and sit appropriately on the cooking area. For around 29% of consumers, pot and zone fit is the primary concern. |
| Installation fit | Check the exact model’s connection instructions and built-in dimensions against your kitchen. | If I am replacing a hob, I need to know whether the new one fits the worktop and existing electrical provision. Installation comes first for roughly 21% of consumers. |
| Room for larger batches | Compare pot-base size with zone layout and any bridge or flex area. | When I use a broad pot or cook another dish alongside the soup, I need a layout that accommodates my pans. Around 14% of consumers prioritise that flexibility. |
Induction needs a ferromagnetic base, and pot-base size matters when matching cookware to a zone.
Test the underside with a magnet, then compare the flat base with the hob’s zone guidance before choosing a model.
Connection requirements vary by model: Beko describes the HIIP64530UFT as suitable for a standard 13 A socket, whereas AEG specifies the TO64IB00FB as hardwired only.
Plan the replacement using the exact model’s installation instructions rather than its width or appearance.
A hardwired choice may also mean arranging electrical work before you can use the hob.
A combined cooking area does not establish whether your particular pot base or existing worktop opening will fit.
Measure both, then compare them with the model’s cooking-zone and built-in dimensions.
A cracked ceramic or induction glass surface should not be used.
Stop using the hob and arrange professional assessment rather than continuing to cook on it.
Bosch’s PUE611BB5B is a reference point for a 60 cm hob with touch controls and a model-specific Plug & Play designation.
Beko’s HIIP64530UFT is relevant when a model explicitly described for a standard 13 A socket is part of the search.
AEG’s TO64IB00FB gives cooks using broad cookware a 60 cm bridge-zone option to assess.
NEFF’s T56TT60N0 is a reference point for cooks comparing flex zones and a removable TwistPad control.
These hobs offer 60 cm and wider options for making potato soup. Compare each model’s pot fit, worktop dimensions and electrical requirements before choosing; a bridge area or a hardwired designation applies only where stated for that model.
Image unavailable
If you make soup while using other pans, consider whether this four-zone layout suits your cooking routine.
Compare your pot base with the zone dimensions, and check the installation instructions against your worktop and electrical supply.
Image unavailable
For a soup pot on a 60 cm hob, compare the intended cooking zone with the pot’s flat base.
This variant is labelled hardwired; check the electrical provision, worktop fit and installation instructions before ordering.
Image unavailable
If you prepare another dish alongside potato soup, check whether its four-zone layout accommodates your pans.
Confirm the soup pot’s zone fit, the worktop opening and the model’s electrical installation requirements.
Image unavailable
For a broad soup pot, compare its base with this model’s flexible bridge area.
The hob is 77 cm wide, so measure the available worktop space and check the required cut-out and electrical connection.
Image unavailable
If you use different-sized cookware while making soup, compare the pot bases with this model’s Area Flex layout.
Check the cooking-zone dimensions, worktop cut-out and electrical connection requirements for the exact model.
It will work if its base is ferromagnetic and suitably matched to the cooking zone. Test the underside with a magnet, then check that the base is flat and compare its diameter with the hob’s zone guidance.
Not if your soup pot fits a standard cooking zone. A bridge or flex area is worth considering when you use a broader pot or need a more adaptable layout for other pans; still check the exact zone and pot-base dimensions.
No: the connection depends on the exact model. Beko describes the HIIP64530UFT as suitable for a standard 13 A socket, while AEG specifies the TO64IB00FB as hardwired only. Check the installation instructions and your kitchen’s electrical provision before buying.