Choose a panel heater’s output after checking the office’s dimensions, insulation, draughts and whether it will provide the main heat or supplement another system; “small room” alone cannot determine a wattage. For regular work hours, prioritise a thermostat and timer, adding Wi-Fi only if remote changes matter to you. Check the exact model’s connection method and where it can be positioned before ordering.
If you spend hours seated at a desk, check the room’s dimensions, insulation and draughts before choosing an output. You also need a position with clear space around the heater; Electrical Safety First advises keeping space above and around convection heaters.
If you use the office at predictable times, compare thermostats and programmable timers before deciding whether remote control would add anything to your routine.
If the heater will occupy a particular wall or floor position, check the exact model’s mounting instructions and whether it has a plug or calls for a fused-spur connection before you buy.
Establish the output and a position with clear airflow for your particular room first. Then compare controls for your working hours and the connection required by the exact model.
| Concern | What to check | Who this matters to |
|---|---|---|
| Heat for the room | Measure the room and note its insulation, glazing and draughts; compare its needs with the manufacturer’s sizing guidance for the exact output. | If my office is draughty, I need an output chosen for that room rather than its “small” label; around 40% of consumers put room coverage first. |
| Work-hours control | Compare the thermostat and timer; if you want remote changes, check whether Wi-Fi is built in or requires extra hardware. | When I work regular hours, I want warmth while I use the office without leaving the heater on unnecessarily; roughly 30% of consumers prioritise scheduling and temperature control. |
| Placement and connection | Check the selected variant’s plug or fused-spur arrangement, mounting instructions and required clearances. | Before ordering, I need a position with clear airflow and a connection suited to the heater; around 30% of consumers make safe installation their primary concern. |
Panel-heater ranges contain substantially different outputs, while a room’s insulation and draughts affect what it needs.
Measure the office and consult the exact manufacturer’s sizing guidance. Decide whether the panel will supplement existing heating or heat the room on its own.
The Dimplex PLXE specification describes a cable for fused-spur installation. SolAire Heating Products UK says its Adax Neo WiFi 1500W, 2000W and 2400W variants are supplied without a plug.
Check the connection method and installation instructions for the particular variant, not just its product-family name.
Electrical Safety First advises leaving clear space above and around convection heaters. A desk, curtains or other furniture may obstruct the intended position.
Plan where the heater will go before choosing a model, and follow its clearance and grille instructions.
A traceable supplier and the exact model details matter if you need instructions or recall information later. Electrical Safety First advises buying from a reputable retailer and registering the product for recall contact.
Keep the model details and proof of purchase, check the marking guidance applicable to the delivery location, and register the heater after purchase.
The PLXE line includes wall-mounted, electronically controlled panel heaters in outputs from 0.50kW to 3.00kW, according to Dimplex’s PLXE specification.
SolAire Heating Products UK lists Adax Neo timer-and-thermostat models from 400W to 2000W, alongside Neo WiFi variants.
Ecostrad describes its smart panel heaters as options for supplementary or occasional room heating.
There is no single wattage to choose from the description “small home office”. Measure the room, note its ceiling height, insulation, glazing and draughts, then use the exact manufacturer’s sizing guidance. Also establish whether the heater will supplement another heat source.
For regular office hours, compare a thermostat and programmable timer before paying attention to Wi-Fi. Scheduling can follow the hours you occupy the room; remote control is useful if you need to change that schedule away from the heater. Check whether app control is built in or needs separate hardware.
Not necessarily: the connection depends on the exact model and variant. The Dimplex PLXE specification describes fused-spur installation, while SolAire Heating Products UK says its Adax Neo WiFi 1500W, 2000W and 2400W variants come without a plug. Check the selected heater’s installation instructions before ordering.
Check the route for the actual delivery location, because Great Britain and Northern Ireland are listed separately. In its table dated 31 March 2026, the Department for Business and Trade lists UKCA or CE for electrical equipment in Great Britain, and CE, or UKNI together with CE, for Northern Ireland. Confirm which route applies to the exact product being supplied.
Electrical Safety First advises against using a portable heater overnight. If you choose a portable or freestanding model for daytime use, position it where it cannot be knocked over, keep its air paths clear and follow its instructions.