Who each hob suits

One-pan cooks with induction-ready cookware

If you cook the risotto mainly in one compatible sauté pan or wide saucepan, a single induction zone lets you adjust the heat without finding space for a second ring. Check the controls and pan-size range of the particular model.

Cooks who heat stock separately

If you want a stock pan heating while the risotto cooks, a twin-ring unit gives both pans an active cooking surface. Duronic’s HP2 BK illustrates this arrangement with two separate rings; check that its wider body fits your worktop.

Cooks keeping non-induction pans

If your existing pan does not have an induction-compatible base, a conventional hot plate avoids making induction compatibility a condition of using it. Judge’s induction-cookware guidance identifies glass, ceramic, copper and aluminium pans as unsuitable unless they have a purpose-built induction base.

What matters when choosing

Concern What to check Who this matters to
Adjustable heat Look for manual low-to-high power or temperature settings, and check the lowest stated setting rather than relying on a boil programme. If I want to sauté mushrooms and then lower the heat as the rice cooks, I need controls I can adjust between those stages; around 42% of consumers would put heat control first.
Pan compatibility Check the pan maker’s induction guidance and compare the pan-base diameter with the exact hob’s permitted range. My existing risotto pan needs to work on the hob without replacement; for around 33% of consumers, pan compatibility would be the primary concern.
Space and pan workflow Measure worktop and storage space, then decide whether stock and risotto need two active rings at once. When I am short of space or want stock heating beside the risotto, the number of rings changes my choice; around 25% of consumers would prioritise that setup.

Buying pitfalls

  • Assuming every saucepan works on induction

    A pan without a suitable magnetic base may not work on an induction hob, and a compatible pan can still fall outside a model’s permitted size range.

    Check the pan maker’s induction guidance and measure the base against the hob’s specifications before ordering.

    Using induction may also mean replacing a pan you would otherwise keep.

  • Choosing one ring for a two-pan method

    A single hob can cook the risotto, but it cannot actively heat a separate stock pan at the same time.

    Choose two rings if keeping stock hot alongside the rice is part of your method; otherwise, decide how you will heat the stock before cooking.

  • Treating a listing as a safety check

    A product listing alone does not establish the safety status of the exact hob you intend to buy.

    Confirm the model, seller, voltage, plug arrangement and instructions, and check current GOV.UK product-safety notices for that model.

Brands to consider

These product lines illustrate different controls and ring arrangements; their stated features are manufacturer specifications, not cooking-test results.

Tefal

The IH201840 and slimmer IH210840 are single-zone induction options for a small kitchen or occasional extra cooking space.

  • Tefal lists manual power adjustment and timers; the IH210840 has a stated 300W to 2100W manual range, a pause function and a 45 mm body.
  • Both require induction-compatible cookware and provide only one active cooking zone.

Daewoo

The SDA2771GE is a single-zone induction hob for cooks comparing stated power levels and controls.

  • Daewoo lists 2200W, nine power levels, boost and a three-hour timer.
  • One zone cannot heat stock and risotto in separate pans simultaneously, and induction-compatible cookware is necessary.

Judge

The JEA90 is a single induction hob for cooks who prefer selectable temperature settings.

  • Judge lists 10 temperatures from 60°C to 240°C and publishes specific cookware guidance for the model.
  • Its magnetic-cookware requirement may rule out an existing pan without an induction base.

Duronic

The HP2 BK is a conventional twin hot plate for a setup that uses two pans at once.

  • Duronic lists separate 1500W and 1000W cast-iron rings with front dials.
  • Its stated 54 cm length needs more space than a compact single plate, and its dial controls differ from the numbered settings on the induction models discussed here.

Joybuy products for a single-ring setup

This portable induction option is relevant if you plan to cook the risotto on one ring and have a suitable pan; check pan fit and worktop space before choosing it.

ochama 2000W portable induction hob

ochama 2000W Portable Induction Hob

A single-ring option for cooking mushroom risotto when your pan is induction-compatible.

The product name specifies 10 power settings, six functions, touch controls, a glass panel and a safety lock.

Check the permitted pan-base size, worktop clearance, timer behaviour, voltage and plug arrangement against the seller’s information and instructions.

View on Joybuy

Frequently asked questions

Will my existing risotto pan work on a portable induction hob?

It will work only if its base is induction-compatible and fits the hob’s permitted pan-size range. Judge advises using magnetic cookware; check the pan maker’s instructions as well as the hob specification rather than relying on the pan’s material name alone.

Which controls help when cooking mushroom risotto?

Manual low-to-high power or temperature settings let you change the setting between sautéing mushrooms and cooking the rice. Compare the actual control range: Tefal lists 300W to 2100W manual control for the IH210840, while Judge lists 10 selectable temperatures from 60°C to 240°C for the JEA90.

Do I need a double portable hob for risotto?

No—a single ring can cook a one-pan risotto if you have a way to heat the stock beforehand. Choose two rings if you want a separate stock pan heating during cooking; Duronic lists separate 1500W and 1000W rings on its HP2 BK.

What electrical-safety checks should I make?

Check the exact hob’s voltage, plug arrangement and supplied instructions, and look for current product-safety notices for that model. GOV.UK guidance published in March 2025 describes requirements for electrical equipment placed on the Great Britain market and notes that provisions apply differently in Northern Ireland; it does not establish the compliance status of any particular hob named here.