Choose a 45 cm slimline dishwasher only after checking the full installation space, pipework and door clearance; the narrower format can limit how much a shared kitchen washes at once. For dishwasher-safe cutlery, compare the actual basket or tray layout with the dishes that build up between cycles, and check programme conditions before relying on a quick wash. Compare each model’s Eco-cycle information and declared noise alongside its capacity, rather than choosing by width alone.
If several people use the same cutlery and dishes, compare place settings with the cutlery layout and the space left for mugs, bowls and pans. Check the stated load and soil conditions before counting on a quick programme for a busy day.
A 45 cm category width is only a starting point. Measure the available height, width and depth, then allow for pipework and enough room to open and load the door.
Compare the exact model’s declared noise and Eco-cycle figures. Half-load and delay features are worth checking if the household wants flexibility over when and how much it washes.
Settle the installation format and measure the space before comparing interiors. A freestanding model suits an appropriate open appliance space; a fully integrated model needs a compatible fitted niche and door-panel arrangement. Within either format, the cutlery layout is a separate, model-specific choice.
| Concern | What to check | Who this matters to |
|---|---|---|
| Cutlery and shared loads | Compare place settings and the basket or tray layout with the cutlery, bowls and pans usually waiting between cycles. | If cutlery piles up alongside everyday dishes, I need an interior I can load without crowding the rest of the wash. Around 40% of consumers put shared-load organisation first. |
| Fit and installation | Check full appliance and niche dimensions, pipework allowance, door clearance and whether the space calls for a freestanding or integrated model. | When the available space is tight, I need to know the machine and its open door will fit before choosing its features. Fit is the primary concern for around 30% of consumers. |
| Noise, resources and timing | Read the model’s Eco-cycle figures and noise declaration; check any delay, half-load or quick-programme conditions. | In a kitchen used throughout the day, I want to plan washes around other people and understand what each cycle uses. Around 30% of consumers prioritise noise, running-resource information and timing flexibility. |
Category width does not account for appliance height and depth, rear pipework or the space needed to open and load the door.
Measure the installation point in all three dimensions and compare it with the chosen model’s measurements. Dishwasher measurement guidance also calls for checking the available height, width and depth.
Beko describes the DVS04X20 Mini 30' programme for lightly soiled dishes; Hotpoint describes the HP2FE10CS90BUK Rapid Wash for a small, lightly soiled load. Neither description makes a short cycle the default for heavily soiled dishes.
Match the load and soil level to the chosen model’s programme guidance, and check its other cycles for dirtier shared loads.
A fully integrated dishwasher depends on a compatible fitted niche and door-panel arrangement. A 45 cm width does not establish that it can replace a freestanding appliance.
Confirm the niche, panel and installation plan before ordering, including whether changes to the shared kitchen are authorised.
Models can differ in stated Eco-cycle water use, electricity use, capacity and noise, so the class alone does not describe how a machine fits the household’s routine.
For a UK product in scope, read its energy label and product-information sheet at the point of sale, then compare the model-specific figures with the loading space you need.
These examples show features to compare on specific models, not features shared by every dishwasher from a brand.
Beko lists both freestanding and integrated slimline options. Its freestanding DVS04X20 is one example for comparing a removable cutlery basket with shared-load needs.
The freestanding HP2FE10CS90BUK offers a 45 cm example for households comparing basket adjustment and wash scheduling.
The freestanding SPS2IKW01G provides model-specific dimensions and Eco-cycle information to compare against a measured space and the household’s routine.
The fully integrated G 5790 SCVi SL is relevant where a compatible fitted niche and a cutlery tray are priorities.
These slimline choices cover freestanding and integrated formats for a shared kitchen. Compare the cutlery layout and installation requirements of each model before deciding which suits the space.
No image available
Consider this model if a freestanding space and a nine-place-setting load suit the shared kitchen; check that its cutlery arrangement works for the utensils used most often.
Bosch specifies dimensions of 845 × 450 × 600 mm, a height-adjustable top basket and 9.5 L of water per Eco programme for the SPS2IKW01G. Allow separately for pipework and door opening.
No image available
This nine-place-setting model is a choice to assess for an open appliance space; compare its cutlery storage with the household’s usual shared load.
The product name specifies an E energy class. Check the model’s full dimensions, noise declaration and cycle information against the installation space and washing routine.
No image available
Consider this model if the household needs to assess a narrow dishwasher against its shared load, but inspect the cutlery arrangement before choosing it primarily for utensils.
The product name states 49 dB and an E energy class. Check the full installation dimensions and the stated conditions of any short programme.
No image available
This integrated model is relevant if the shared kitchen already has a suitable fitted-appliance space. Confirm the niche, furniture door and installation arrangements before ordering.
The product name specifies 10 place settings and an E energy class. Inspect the cutlery layout to decide whether it works for the household’s utensils and dishes.
No image available
Consider this model for a compatible fitted-kitchen niche, rather than as a direct choice for an open freestanding space. Obtain the full appliance and niche measurements and inspect its cutlery layout before committing.
The product name specifies a fixed-door hinge kit and an E energy class. Confirm the decorative panel and fitting arrangements for the kitchen.
No. Measure the available height, width and depth, allow for pipework, and check that the door can open for loading. Actual dimensions vary: Beko specifies a width of 44.8 cm and a depth of 60 cm for the DVS04X20.
No; check both the soil level and load size stated for the programme. Beko specifies lightly soiled dishes for the DVS04X20 Mini 30', while Hotpoint specifies a small, lightly soiled load for the HP2FE10CS90BUK Rapid Wash.
Choose by the installation space: a freestanding model needs an appropriate open appliance space and services, while a fully integrated model needs a compatible fitted niche and door-panel arrangement. Confirm any proposed kitchen alterations with the people responsible for the space.
Compare each model’s energy label and product-information sheet, Eco-cycle water and electricity figures, and declared noise alongside its capacity. Beko states 11.9 L and 0.755 kWh per Eco cycle for the DVS04X20; Bosch states 9.5 L of water per Eco programme for the SPS2IKW01G. Different figures alone do not determine a household’s total running cost, which also depends on use and tariffs.