Who this choice suits

Frequent table-linen pressers

If you press several napkins at once, sustained steam matters throughout the batch, while a boost offers a separate burst for stubborn creases.

Small utility-room organisers

A separate steam-generator base has to fit where you iron and store it. A compact design and removable tank may make that arrangement easier to manage.

Maintenance-minded households

An accessible scale-care system matters if you are prepared to follow the model’s instructions for water, cleaning and cooling.

What matters when choosing

Compare continuous steam for the pressing you do most often, then check whether the generator fits your workspace and whether its maintenance routine suits you.

Concern What to check Who this matters to
Steam for repeated pressing Compare continuous output in g/min for the exact model; consider the separate boost figure for stubborn creases. If I press a batch of napkins, I want sustained steam rather than relying on occasional bursts. Around 42% of consumers put steam performance first.
Utility-room fit and refilling Measure the ironing and storage areas, including clearance to remove the tank and reach a suitable socket. With limited room around my ironing setup, I need a base I can place, store and refill comfortably; roughly 33% of consumers prioritise fit and access.
Scale care and safe use Check the model’s permitted water, cleaning and cooling instructions, plus its plug and socket requirements. I would rather choose a care routine I can keep up with than neglect scale removal between uses. About 25% of consumers make maintenance and safe operation their primary concern.

Buying pitfalls

  • Choosing by the steam-boost figure alone

    A boost is a short burst; it does not describe the steam available throughout a batch of napkins. Pump pressure is a different specification again.

    Compare continuous output first, then look at the boost, tank and scale-care features for the exact model.

  • Applying one water rule to every iron

    Water guidance varies by model. Morphy Richards recommends deionised, distilled or demineralised water for extra limescale protection with its EasySteam+, while its wider support guidance directs owners to their individual manuals.

    Check the exact model’s permitted water and descaling instructions before use; do not assume advice for another iron applies.

  • Assuming a compact base will fit the whole setup

    The base still needs space for tank removal, a suitable resting position and access to a socket.

    Measure both the storage space and ironing area, including the clearance needed to lift out the tank.

  • Relying on auto shut-off instead of attentive use

    Auto shut-off does not make it appropriate to leave an iron unattended. Electrical Safety First also warns against overloading socket outlets and extension leads.

    Unplug the appliance after use and let it cool in a safe place, following its manual.

Brands to consider

Tefal

The Pro Express Ultimate II GV9713 is a high-output option to examine if you regularly press batches of linen napkins.

  • Tefal lists 160 g/min continuous steam, a 580 g/min boost, a removable scale collector and a removable tank for the GV9713.
  • Its quoted steam figures do not establish how it will compare with other generators in your utility-room setup; check its size and maintenance instructions as well.

Braun

The CareStyle Compact Pro IS2565BL is worth considering when storing the generator is a central concern.

  • Braun lists 125 g/min continuous steam, a 430 g/min shot and a 1.5 L removable tank for the IS2565BL.
  • Braun’s space-saving comparisons relate to specified Braun models, not every steam generator; measure your own storage area before choosing.

Morphy Richards

The EasySteam+ line offers a large removable tank and scale-care features for buyers who place particular value on refilling and routine upkeep.

  • Morphy Richards lists a 1.8 L removable tank, Cal-clean anti-scale function, iron lock and auto shut-off for EasySteam+.
  • Water requirements vary by model; use the instructions for the particular EasySteam+ you choose rather than general iron-care advice.

Joybuy products

Related products coming soon.

Common questions

Is a steam generator useful for pressing linen napkins?

It can be useful when you press napkins repeatedly: John Lewis & Partners explains that continuous steam acts on textile fibres throughout ironing. Compare continuous output for batch pressing and treat the boost as a separate, short burst for difficult creases.

Should I put tap or distilled water in the tank?

Use the water specified in your exact model’s manual. Morphy Richards recommends deionised, distilled or demineralised water for extra limescale protection with EasySteam+, but its support guidance says requirements vary by model. Do not transfer that instruction to a different iron.

What should I check for use in a UK utility room?

Confirm the iron has a standard UK 3-pin plug and fuse, and plan for a suitable socket without overloading it or an extension lead. Electrical Safety First gives both plug-and-fuse advice for irons and guidance against overloaded sockets.

Does an anti-scale feature remove the need for cleaning?

No. Follow the particular model’s water, cleaning and cooling instructions even if it has a scale collector or cleaning function. Morphy Richards advises using the model manual for its descaling procedure rather than assuming the same steps apply to every generator.