Creality Filament System (CFS) for 16-Color Creativity
Ditch tedious manual filament changes! The CFS automatically selects, switches, and relays filaments—plus its airtight storage keeps materials dry and ready. Connect up to 4 CFS units to unlock 16-color printing, turning your most intricate, vibrant design ideas into tangible 3D models effortlessly.
RFID Filament Reader: No Guesswork, Instant Printing
Equipped with a dedicated sensor on the base, the printer automatically detects the color and type of Creality RFID filaments. No more manual input or guesswork—simply load the filament, and the printer handles the rest, getting you started in seconds.
Advanced Auto Bed Leveling for Perfect First Layers
Achieve consistent, flat first layers every time with dual independent motorized X-axis leveling screws. The toolhead’s built-in strain gauge creates a precise leveling mesh, eliminating time-consuming manual adjustments. Say goodbye to failed prints from uneven beds!
48dB Whisper-Quiet Operation: Print Anywhere
Enjoy disturbance-free printing thanks to dynamically balanced fans, frictionless linear rails, and smooth linear rods—all working together to keep noise as low as 48dB (comparable to a soft library hush). Run the printer in your living room, office, or bedroom without disrupting work, rest, or family time.
Hassle-Free Setup + Durable, Stylish Design
Start printing fast with 95% pre-assembled construction—no complicated assembly required. The fold-away display saves space, while the included boot-up guide makes it beginner-friendly. Plus, the built-in webcam with a privacy cap lets you monitor prints remotely without sacrificing privacy. Crafted with die-cast aluminum alloy, the all-metal body is both sturdy and sleek, paired with an X-axis precision linear rail and Y-axis linear rods for stable, accurate prints that last.
| Brand | Creality |
| Model | Hi Combo |
| Build Volume (mm) | 260*260*300 |
| Machine Dimensions (mm) | 483*379*390 |
| Package Dimensions (mm) | Combo: 650×460×560
Single: 650×460×240 |
| Net Weight (kg) | 8.75 |
| Gross Weight (kg) | Single: 11.84kg
Combo: 21.24kg |
| Remoteness Level | Near |
| Printing Materials | Hyper-PLA/PLA/ABS/PETG/PLA-CF |
| Build Plate | Double-sided epoxy plate |
| Display | 3.2-inch touch color screen |
| Power Loss Recovery | Yes |
| Filament Run-out Detection | Yes |
| Dual Z-axis | Yes |
| Auto Bed Leveling | Yes |
| Bit | 32-bit |
| Silent | Yes |
| Connection/Print Method | USB Drive/WiFi |
| Max Hotbed Temperature | 100°C |
| Max Nozzle Temperature | 300°C |
| Rated Voltage | 100-240V~ |
| Rated Power | 1150W |
| Max Print Speed | 500 mm/s |
| Typical Print Speed | 300 mm/s |
| Acceleration | 12000 mm/s² |
| Power Frequency | 50/60 Hz |
| Power Output Voltage | 24V |
| Number of Nozzles | 1 |
| Nozzle Diameter | Standard 0.4mm |
| Layer Height | 0.12~0.28mm |
| Printing Accuracy | 100±0.1mm |
| Filament Diameter | 1.75mm |
| Supported Slicer Formats | STL/OBJ/3MF |
| Compatible Slicer Software | Creality Print 6.0 |
| Manufacturer | Shenzhen Creality 3D Technology Co., Ltd. |
| Manufacturer Address | 18th Floor, Jinxiu Hongdu Building, Meilong Avenue, Xinniu Community, Minzhi Sub-district, Longhua District, Shenzhen City, Guangdong Province, China |
| Email | cs@creality.com |
Country of Origin: Manufactured in China
Safety Warnings
·
Keep away from children and flammable materials. Place on a
stable, heat‑resistant surface.
·
Do not touch the nozzle (max. 260°C) or heated bed (max. 120°C)
during operation to prevent burns.
·
Use in a well‑ventilated area. Always use the original power
cord to avoid electrical hazards.
·
Use only compatible FDM filaments (PLA/ABS/PETG, etc.). Store
filaments in dry, sealed containers.
Instructions for Use
Basic Components
Main Body, Control Panel, Extruder (Nozzle), Heated Print
Bed, Filament Spool Holder, X/Y/Z Axes
Quick Operation Steps
·
Unpack and place the printer on a stable surface. Connect the
original power adapter.
·
Level the print bed (auto or manual) to set the proper nozzle
height.
·
Load filament: Heat the nozzle to the recommended temperature,
insert filament into the extruder until extrusion occurs.
·
Import model files via USB/SD card/Wi‑Fi, then start printing.
·
After printing, allow the nozzle and bed to cool before removing
the model.
Daily Maintenance
·
Clean the nozzle and print bed regularly to prevent residue
buildup.
·
Unload filament if the printer will not be used for a long
period; keep filaments dry.
·
Unplug the power cord when not in use. Avoid humid environments.
Common Troubleshooting
·
Poor model adhesion: Re‑level the bed or increase bed
temperature.
·
No filament extrusion: Check filament feeding or clean the
nozzle.
·
Abnormal noise: Turn off the power and check for loose
components.
UK REP
·
Name: APEX CE SPECIALISTS LIMITED
·
Address: 6f East Union Street, Manchester, England, M16 9AE
·
Contact: Wells Yan
·
Tel: +44 161 637 1080
·
E‑mail: info@apex-ce.com
Manufacturer:Shenzhen Creality 3D
Technology Co., Ltd.
Manufacturer Address:18th Floor, Jinxiu
Hongdu Building, Meilong Avenue, Xinniu Community, Minzhi Sub-district, Longhua
District, Shenzhen City, Guangdong Province, China
Email:cs@creality.com
4.6(27 reviews)